Part #: iAT1000
The iAlertTag is the solution to keep you from leaving your
iPhone or valuables behind. The iAlertTag creates a link with your
iPhone so that anytime your phone and the tag are separated, both the
tag and your phone would vibrate and produce an alarm sound.
- • SECURES: The iAlertTag is the solution to keep your
iPhone/iPad, and valuables that are attached to the iAlertTag, close to
you. The iAlertTag creates a wireless link with your iPhone/iPad.
- • ALERTS: If you forget and leave your iPhone/iPad behind,
the iAlertTag reminds you by vibrating and/or producing an alarm sound.
Or, if the iAlertTag is attached to your keys and you leave your keys
behind, the iPhone/iPad will sound an alarm to alert you.
- • LOCATES: Forget where you have placed your phone? Simply
press the button on the iAlertTag and your phone will sound an alarm.
Or if you have misplaced the iAlertTag, press the "Find iAlertTag"
button on the app and the iAlertTag alarms with sound and/or vibration.
- • LOCKS YOUR WINDOWS LAPTOP: Step away from your laptop for
a few minutes? The iAlertTag will send a signal to lock your laptop
when you walk away (Cirago BTA8000 required)
The iAlertTag is based on the latest Bluetooth 4.0 Low Energy
technology, so the lightweight compact tag is extremely energy
efficient. Under normal usage, the tag can be used for about one year
before the need to replace the battery. iAlertTag comes with a free
companion app which you can download from the iTunes store. The
iAlertTag app allows you full customizations, such as selecting alarm
sounds for the tag.
- Keep your iPhone with you
- Find your iPhone
- Lock your Windows laptop
||2" x 1.2" x 0.35"
||iPhone 4S, the new iPad (3rd gen), and newer versions.
Windows: PC with Cirago BTA8000 (Bluetooth 4.0)
||Alert is triggered within range of approx. 25 feet
(actual performance depends on customer's environment conditions)
- How do I open the battery cap on the back of
Insert a nickel into the slot on the battery cap and slowly turn the
nickel counter clockwise to open the cap.
- I just purchased the iAlertTag and the app
shows the battery is less than 100%?
When you turn on the iAlertTag for the very first time, the battery
indicated on the app may not be correct. Power cycle the tag and
restart the app should fix the issue. If the problem persists, turn off
the tag and the app, open the battery cap on the back of the iAlertTag,
reposition the battery, and close the battery cap. Turn on both the tag
and the app and the battery indicator should now provide the correct
- How long is the battery good for?
Around 7 to 8 months under normal usage - but note that battery life
varies depending on user\'s usage and environment.
- I am having trouble pairing the iAlertTag
with my iPhone/iPad
Power cycle the iAlertTag and your iPhone 4S or iPad (3rd gen) by
following these steps: 1) If the iAlertTag is ON, turn it off by
pressing and holding the red button for 4 seconds. 2) Power cycle your
iPhone 3) Once your iPhone is back ON, turn on iPhone\'s Bluetooth and
launch the iAlertTag app. 4) Turn on the iAlertTag by pressing and
holding the red button for 4 seconds. The tag\'s LED will start
flashing. 5) The app should pair with the iAlertTag at this point. The
tag\'s LED stops flashing once it\'s paired. If you still do not see
the tag on the app, try pressing the refresh button on the app
- iAlert Tag